Monday, December 2, 2024
HomeBusiness8 Ways To Save Money and Water Through Plumbing Fixtures

8 Ways To Save Money and Water Through Plumbing Fixtures

A large amount of water is wasted or not accounted for in the average household which can be prevented by using more efficient plumbing fixtures. When installing these plumbing fixtures, it is important to let a professional plumber Sydney handle them to ensure optimal performance.

 

Now, saving money on utility bills and helping to conserve resources around the world is why everyone should look to update their bathroom plumbing fixtures, especially because there are so many options now available to consumers. Here are some of our recommendations.

 

Low Flow Showerheads

 

A traditional showerhead uses between 2.5 and 5 gallons per minute (GPM) while popular low flow models use roughly half as much at 1.5 GPM. The EPA estimates that over 18 billion gallons of water could be saved every year if these were installed in homes across the country. Another option for saving gallons of water each day would be installing a new shower head with a flow restrictor built right in so as little as 2 GPM can go through this fixture. This type of device still uses enough power from the hot water line so consumers do not have to worry about energy use.

 

Dual Flush Toilets 

 

These toilets have both a full flush and a partial flush option that can be activated depending on the time of day and the amount of waste in the bowl. WaterSense, an EPA program, has many models available for consumers to choose from and they all qualify for points towards energy certification.

 

Faucet Aerators

 

This device screws onto the end of a standard faucet and mixes air into the water flow which creates small bubbles to enhance rinsing power while using less water. Low flow faucet aerators add roughly half as much GPM when compared with regular tap water flow rates so these are also good for conserving resources.

 

Ultra-Efficient Toilets 

 

These models are designed specifically for commercial use, although they can be found in residential homes as well. These fixtures flush away waste without using up all of the water inside of them so there is less to refill after each flush cycle. The average model only needs 1.28 gallons per flush compared with older versions requiring 3 or more GPMs making these toilets extremely energy efficient.

 

Tankless Water Heaters 

 

This heating system is designed to work without the need for a large tank that retains water which is then heated up and used by other fixtures in the home or business until it needs to be reheated. The smaller amount of water necessary to operate these devices means that they will use less energy, save money on utility bills and contribute less greenhouse gas emissions into the environment.

 

Toilet Tank Covers 

 

A simple, cheap and easy way to conserve water is by purchasing a toilet tank cover that fits right over the existing device which will prevent it from using more than necessary to function properly. These are commonly used in public restrooms or in homes where a large amount of water can be wasted when not accounted for.

 

Repair Leaky Faucets  

 

This is something everyone can do on their own without calling a professional plumber because the tools needed are fairly basic and inexpensive so even renters can take care of this problem easily. Fixing these types of leaks right away means less water is lost every day through the faucet so this is one of the easiest ways to conserve resources.

 

Check for Leaks

 

Another simple task that can be done without calling a plumber is to check around all faucets, toilets and other places where water might pool on the floor or outside the house to look for any leaks. They are more common than people realize so by simply checking these areas regularly it will be easy to spot problems before they become serious leaks.

 

These examples of plumbing fixtures available today illustrate how much easier it is than ever before to save energy and money while still using luxurious bathrooms every day. Replacing just a single device can make a difference in terms of reducing utility bills and helping protect natural resources around the so everyone should be willing to spend a little money on these types of fixtures.

 

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments